PAR=EVEN, CHRL=5_BIT, USCLKS=MCK, USART_MODE=NORMAL, CHMODE=NORMAL, NBSTOP=1_BIT
Mode Register
| USART_MODE | USART Mode of Operation 0 (NORMAL): Normal mode 1 (RS485): RS485 2 (HW_HANDSHAKING): Hardware Handshaking 4 (IS07816_T_0): IS07816 Protocol: T = 0 6 (IS07816_T_1): IS07816 Protocol: T = 1 8 (IRDA): IrDA 14 (SPI_MASTER): SPI Master 15 (SPI_SLAVE): SPI Slave |
| USCLKS | Clock Selection 0 (MCK): Master Clock MCK is selected 1 (DIV): Internal Clock Divided MCK/DIV (DIV=8) is selected 3 (SCK): Serial Clock SLK is selected |
| CHRL | Character Length. 0 (5_BIT): Character length is 5 bits 1 (6_BIT): Character length is 6 bits 2 (7_BIT): Character length is 7 bits 3 (8_BIT): Character length is 8 bits |
| SYNC | Synchronous Mode Select |
| PAR | Parity Type 0 (EVEN): Even parity 1 (ODD): Odd parity 2 (SPACE): Parity forced to 0 (Space) 3 (MARK): Parity forced to 1 (Mark) 4 (NO): No parity 6 (MULTIDROP): Multidrop mode |
| NBSTOP | Number of Stop Bits 0 (1_BIT): 1 stop bit 1 (1_5_BIT): 1.5 stop bit (SYNC = 0) or reserved (SYNC = 1) 2 (2_BIT): 2 stop bits |
| CHMODE | Channel Mode 0 (NORMAL): Normal Mode 1 (AUTOMATIC): Automatic Echo. Receiver input is connected to the TXD pin. 2 (LOCAL_LOOPBACK): Local Loopback. Transmitter output is connected to the Receiver Input. 3 (REMOTE_LOOPBACK): Remote Loopback. RXD pin is internally connected to the TXD pin. |
| MSBF | Bit Order |
| MODE9 | 9-bit Character Length |
| CLKO | Clock Output Select |
| OVER | Oversampling Mode |
| INACK | Inhibit Non Acknowledge |
| DSNACK | Disable Successive NACK |
| INVDATA | INverted Data |
| MAX_ITERATION | Maximum Number of Automatic Iteration |
| FILTER | Infrared Receive Line Filter |