OSCBYPASS=NO_EFFECT, ONREG=ONREG_UNUSED, BODDIS=ENABLE, BODRSTEN=NOT_ENABLE
Supply Controller Mode Register
| BODRSTEN | Brownout Detector Reset Enable 0 (NOT_ENABLE): the core reset signal “vddcore_nreset” is not affected when a brownout detection occurs. 1 (ENABLE): the core reset signal, vddcore_nreset is asserted when a brownout detection occurs. |
| BODDIS | Brownout Detector Disable 0 (ENABLE): the core brownout detector is enabled. 1 (DISABLE): the core brownout detector is disabled. |
| ONREG | Voltage Regulator enable 0 (ONREG_UNUSED): Voltage Regulator is not used 1 (ONREG_USED): Voltage Regulator is used |
| OSCBYPASS | Oscillator Bypass 0 (NO_EFFECT): no effect. Clock selection depends on XTALSEL value. 1 (BYPASS): the 32-KHz XTAL oscillator is selected and is put in bypass mode. |
| KEY | Password Key |