READ_MODE=NCS_CTRL, DBW=BIT_8, EXNW_MODE=DISABLED, WRITE_MODE=NCS_CTRL
SMC Mode Register (CS_number = 6)
| READ_MODE | Selection of the Control Signal for Read Operation 0 (NCS_CTRL): The Read operation is controlled by the NCS signal. 1 (NRD_CTRL): The Read operation is controlled by the NRD signal. |
| WRITE_MODE | Selection of the Control Signal for Write Operation 0 (NCS_CTRL): The Write operation is controller by the NCS signal. 1 (NWE_CTRL): The Write operation is controlled by the NWE signal. |
| EXNW_MODE | NWAIT Mode 0 (DISABLED): Disabled 2 (FROZEN): Frozen Mode 3 (READY): Ready Mode |
| BAT | Byte Access Type |
| DBW | Data Bus Width 0 (BIT_8): 8-bit bus 1 (BIT_16): 16-bit bus |
| TDF_CYCLES | Data Float Time |
| TDF_MODE | TDF Optimization |