TBIF=value1, RIF=value1, TXIDLE=value1, RXIDLE=value1, AIF=value1, TSIF=value1, FER1=value1, BRGIF=value1, BUSY=value1, RSIF=value1, SBD=value1, RNS=value1, DLIF=value1, FER0=value1, COL=value1, TFF=value1, RFF=value1
Protocol Status Register [ASC Mode]
| TXIDLE | Transmission Idle 0 (value1): The transmitter line has not yet been idle. 1 (value2): The transmitter line has been idle and frame transmission is possible. |
| RXIDLE | Reception Idle 0 (value1): The receiver line has not yet been idle. 1 (value2): The receiver line has been idle and frame reception is possible. |
| SBD | Synchronization Break Detected 0 (value1): A synchronization break has not yet been detected. 1 (value2): A synchronization break has been detected. |
| COL | Collision Detected 0 (value1): A collision has not yet been detected and frame transmission is possible. 1 (value2): A collision has been detected and frame transmission is not possible. |
| RNS | Receiver Noise Detected 0 (value1): Receiver noise has not been detected. 1 (value2): Receiver noise has been detected. |
| FER0 | Format Error in Stop Bit 0 0 (value1): A format error 0 has not been detected. 1 (value2): A format error 0 has been detected. |
| FER1 | Format Error in Stop Bit 1 0 (value1): A format error 1 has not been detected. 1 (value2): A format error 1 has been detected. |
| RFF | Receive Frame Finished 0 (value1): The received frame is not yet finished. 1 (value2): The received frame is finished. |
| TFF | Transmitter Frame Finished 0 (value1): The transmitter frame is not yet finished. 1 (value2): The transmitter frame is finished. |
| BUSY | Transfer Status BUSY 0 (value1): A data transfer does not take place. 1 (value2): A data transfer currently takes place. |
| RSIF | Receiver Start Indication Flag 0 (value1): A receiver start event has not occurred. 1 (value2): A receiver start event has occurred. |
| DLIF | Data Lost Indication Flag 0 (value1): A data lost event has not occurred. 1 (value2): A data lost event has occurred. |
| TSIF | Transmit Shift Indication Flag 0 (value1): A transmit shift event has not occurred. 1 (value2): A transmit shift event has occurred. |
| TBIF | Transmit Buffer Indication Flag 0 (value1): A transmit buffer event has not occurred. 1 (value2): A transmit buffer event has occurred. |
| RIF | Receive Indication Flag 0 (value1): A receive event has not occurred. 1 (value2): A receive event has occurred. |
| AIF | Alternative Receive Indication Flag 0 (value1): An alternative receive event has not occurred. 1 (value2): An alternative receive event has occurred. |
| BRGIF | Baud Rate Generator Indication Flag 0 (value1): A baud rate generator event has not occurred. 1 (value2): A baud rate generator event has occurred. |