ENFT=value1, WEN=value1, DBP=value1, DSEL=value1, TRED=value1, PEN=value1, GEN=value1
Channel Configuration
| PKTH | Packer Threshold |
| PEN | Packer Enable 0 (value1): The packer is not used 1 (value2): On-time and off-time counters are running and the packed output bitstream with the packer trigger are generated. |
| DSEL | Dimming Select 0 (value1): Dimming Engine 0 1 (value2): Dimming Engine 1 2 (value3): Dimming Engine 2 7 (value8): Global Dimming Level |
| DBP | Dimming Input Bypass 0 (value1): Channel brightness is the product of the selected dimming input and the channel intensity 1 (value2): No dimming input is used, channel brightness is only determined by the channel intensity level |
| GEN | Gating Enable 0 (value1): Gating function is disabled, the input signal (BCCU.INy) has no effect 1 (value2): Gating function is enabled, the output gating signal is BCCU.INy |
| WEN | Flicker Watchdog Enable 0 (value1): The flicker watchdog is not used 1 (value2): The flicker watchdog is active and limits the number of consecutive zeroes at the sigma-delta modulator output according to GLOBCON.WDMBN |
| TRED | Trigger Edge 0 (value1): Channel triggers occur on channel output transition from passive to active level 1 (value2): Channel triggers occur on channel output transition from active to passive level |
| ENFT | Forced Trigger Enable 0 (value1): No forced trigger is generated 1 (value2): The trigger generator generates a trigger if the output of the sigma-delta modulator hasn’t changed state for 256 bit times; only takes effect if the packer is disabled (PEN=0) |
| LINPRES | Linear Walker Clock Prescaler |