SLEEP=value1, BUSY=value1, WRPERR=value1, ECC2READ=value1, ECC1READ=value1, VERR=value1
NVM Status Register
| BUSY | Busy 0 (value1): The NVM is not busy. Memory reads from the cell array and register write accesses are possible. 1 (value2): The NVM is busy. Memory reads and register write accesses are not possible. |
| SLEEP | Sleep Mode 0 (value1): NVM not in sleep mode, and no sleep or wake up procedure in progress. 1 (value2): NVM in sleep mode, or busy due to a sleep or wake up procedure. |
| VERR | Verify Error 0 (value1): No fail bit. 1 (value2): One fail bit in one data block. 2 (value3): Two fail bits in two different data blocks. 3 (value4): Two or more fail bits in one data block, or three or more fail bits overall. |
| ECC1READ | ECC1 Read 0 (value1): No ECC single bit failure occurred. 1 (value2): At least one ECC single bit failure was detected and corrected. |
| ECC2READ | ECC2 Read 0 (value1): No ECC two bit failure during memory read operations. 1 (value2): At least one ECC two bit failure was detected. |
| WRPERR | Write Protocol Error 0 (value1): No write protocol failure occurred. 1 (value2): At least one write protocol failure was detected. |