BFA2=value1, BFI1=value1, BFA1=value1, BFA0=value1, BFL3=value1, BFI2=value1, BFI0=value1, BFI3=value1, BFL1=value1, BFL0=value1, BFA3=value1, BFL2=value1
Boundary Flag Register
| BFL0 | Boundar0 Flag y 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFL1 | Boundar1 Flag y 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFL2 | Boundar2 Flag y 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFL3 | Boundar3 Flag y 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFA0 | Boundar0 Flag y Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFA1 | Boundar1 Flag y Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFA2 | Boundar2 Flag y Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFA3 | Boundar3 Flag y Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFI0 | Boundar0 Flag y Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |
| BFI1 | Boundar1 Flag y Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |
| BFI2 | Boundar2 Flag y Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |
| BFI3 | Boundar3 Flag y Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |