ULPWDGEN=value1, RTCE=value1, AHIBIO0HI=value1, HIBIO0SEL=value1, XTALGPI1SEL=value1, ADIG0SEL=value1, HIB=value1, AHIBIO0LO=value1, VBATHI=value1, WKPEN=value1, VBATLO=value1, WKUPSEL=value1, WKPEP=value1, STDBYSEL=value1, RCS=value1, HIBIO0POL=value1
Hibernate Domain Control Register
| WKPEP | Wake-Up on Pin Event Positive Edge Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |
| WKPEN | Wake-up on Pin Event Negative Edge Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |
| RTCE | Wake-up on RTC Event Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |
| ULPWDGEN | ULP WDG Alarm Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |
| HIB | Hibernate Request Value Set 0 (value1): External hibernate request inactive 1 (value2): External hibernate request active |
| XTALGPI1SEL | Multiplex Control for RTC_XTAL_1 Select as GPI Input 0 (value1): RTC_XTAL_1 input selected 1 (value2): Analog comparator output for HIB_IO_1 or pre-selected digital IO input |
| RCS | fRTC Clock Selection 0 (value1): fOSI selected 1 (value2): fULP selected |
| STDBYSEL | fSTDBY Clock Selection 0 (value1): fOSI selected 1 (value2): fULP selected |
| WKUPSEL | Wake-Up from Hibernate Trigger Input Selection 0 (value1): HIB_IO_1 pin selected 1 (value2): HIB_IO_0 pin selected |
| GPI0SEL | General Purpose Input 0 Selection 1 (value2): HIB_IO_0 pin selected |
| HIBIO0POL | HIBIO0 Polarity Set 0 (value1): Direct value 1 (value2): Inverted value |
| ADIG0SEL | Select Analog Channel 0 or Digital Output Path 0 (value1): Digital input 1 (value2): Analog comparator result for HIB_IO_0 |
| HIBIO0SEL | HIB_IO_0 Pin I/O Control (default HIBOUT) 0 (value1): Direct input, No input pull device connected 1 (value2): Direct input, Input pull-down device connected 2 (value3): Direct input, Input pull-up device connected 8 (value4): Push-pull HIB Control output 9 (value5): Push-pull WDT service output 10 (value6): Push-pull GPIO output 12 (value7): Open-drain HIB Control output 13 (value8): Open-drain WDT service output 14 (value9): Open-drain GPIO output 15 (value10): Analog input |
| VBATLO | Wake-Up on VBAT Falling Below Threshold Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |
| VBATHI | Wake-Up on VBAT Rising Above Threshold Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |
| AHIBIO0LO | Wake-Up on Analog HIB_IO_0 Falling Below Threshold Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |
| AHIBIO0HI | Wake-Up on Analog HIB_IO_0 Rising Above Threshold Enable 0 (value1): Wake-up event disabled 1 (value2): Wake-up event enabled |