SCALE=value1, ANAEN=value1, MULDIV=value1, TRIGMOD=value1
DAC1 Configuration Register 1
| SCALE | Scale value for up- or downscale of the DAC1 input data in steps by the power of 2 (=shift operation) 0 (value1): no shift = multiplication/division by 1 1 (value2): shift by 1 = multiplication/division by 2 2 (value3): shift by 2 = multiplication/division by 4 3 (value4): shift left by 3 = multiplication/division by 8 4 (value5): shift left by 4 = multiplication/division by 16 5 (value6): shift left by 5 = multiplication/division by 32 6 (value7): shift left by 6 = multiplication/division by 64 7 (value8): shift left by 7 = multiplication/division by 128 |
| MULDIV | Switch between up- and downscale of the DAC1 input data values 0 (value1): downscale = division (shift SCALE positions to the right) 1 (value2): upscale = multiplication (shift SCALE positions to the left) |
| OFFS | 8-bit offset value addition |
| TRIGSEL | Selects one of the eight external trigger sources for DAC1 |
| SWTRIG | Software Trigger |
| TRIGMOD | Select the trigger source for channel 1 0 (value1): internal Trigger (integer divided clock - see FREQ parameter) 1 (value2): external Trigger (preselected trigger by TRIGSEL parameter) 2 (value3): software Trigger (see SWTRIG parameter) |
| ANACFG | DAC1 analog configuration/calibration parameters |
| ANAEN | Enable analog DAC for channel 1 0 (value1): DAC1 is set to standby (analog output only) 1 (value2): enable DAC1 (analog output only) |
| REFCFGH | Higher 4 band-gap configuration/calibration parameters |