CH_SUSP=value1, LOCK_CH_L=value1, LOCK_B_L=value1, HS_SEL_SRC=value1, DST_HS_POL=value1, HS_SEL_DST=value1, FIFO_EMPTY=value2, SRC_HS_POL=value1
Configuration Register Low
| CH_PRIOR | Channel priority |
| CH_SUSP | Channel Suspend 0 (value1): Not suspended. 1 (value2): Suspend DMA transfer from the source. |
| FIFO_EMPTY | Indicates if there is data left in the channel FIFO 0 (value2): Channel FIFO not empty 1 (value1): Channel FIFO empty |
| HS_SEL_DST | Destination Software or Hardware Handshaking Select 0 (value1): Hardware handshaking interface. Software-initiated transaction requests are ignored. 1 (value2): Software handshaking interface. Hardware- initiated transaction requests are ignored. |
| HS_SEL_SRC | Source Software or Hardware Handshaking Select 0 (value1): Hardware handshaking interface. Software-initiated transaction requests are ignored. 1 (value2): Software handshaking interface. Hardware-initiated transaction requests are ignored. |
| LOCK_CH_L | Channel Lock Level 0 (value1): Over complete DMA transfer 1 (value2): Over complete DMA block transfer 2 (value3): Over complete DMA transaction |
| LOCK_B_L | Bus Lock Level 0 (value1): Over complete DMA transfer 1 (value2): Over complete DMA block transfer 2 (value3): Over complete DMA transaction |
| LOCK_CH | Channel Lock Bit |
| LOCK_B | Bus Lock Bit |
| DST_HS_POL | Destination Handshaking Interface Polarity 0 (value1): Active high 1 (value2): Active low |
| SRC_HS_POL | Source Handshaking Interface Polarity 0 (value1): Active high 1 (value2): Active low |
| MAX_ABRST | Maximum AMBA Burst Length |