TSOEXT=value1, TSCTRSAT=value1, TSCCMP=value1, ACCCNT=value1, PADT=value1, EPULL=value1, TSCTRR=value1, NR_LEDCOL=value1, COLLEV=value1, PADTSW=value1, NR_TSIN=value1
Function Control Register
| PADT | Touch-Sense TSIN Pad Turn 0 (value1): TSIN0 7 (value2): TSIN7 |
| PADTSW | Software Control for Touch-Sense Pad Turn 0 (value1): The hardware automatically enables the touch-sense inputs in sequence round-robin, starting from TSIN0. 1 (value2): Disable hardware control for software control only. The touch-sense input is configured in bit PADT. |
| EPULL | Enable External Pull-up Configuration on Pin COLA 0 (value1): HW over-rule to enable internal pull-up is active on TSIN[x] for set duration in touch-sense time slice. With this setting, it is not specified to assign the COLA to any pin. 1 (value2): Enable external pull-up: Output 1 on pin COLA for whole duration of touch-sense time slice. |
| FNCOL | Previous Active Function/LED Column Status |
| ACCCNT | Accumulate Count on Touch-Sense Input 0 (value1): 1 time 1 (value2): 2 times 15 (value3): 16 times |
| TSCCMP | Common Compare Enable for Touch-Sense 0 (value1): Disable common compare for touch-sense 1 (value2): Enable common compare for touch-sense |
| TSOEXT | Extension for Touch-Sense Output for Pin-Low-Level 0 (value1): Extend by 1 ledts_clk 1 (value2): Extend by 4 ledts_clk 2 (value3): Extend by 8 ledts_clk 3 (value4): Extend by 16 ledts_clk |
| TSCTRR | TS-Counter Auto Reset 0 (value1): Disable TS-counter automatic reset 1 (value2): Enable TS-counter automatic reset to 00H on the first pad turn of a new TSIN[x]. Triggered on compare match in time slice. |
| TSCTRSAT | Saturation of TS-Counter 0 (value1): Disable 1 (value2): Enable. TS-counter stops counting in the touch-sense time slice(s) of the same (extended) frame when it reaches FFH. Counter starts to count again on the first pad turn of a new TSIN[x], triggered on compare match. |
| NR_TSIN | Number of Touch-Sense Input 0 (value1): 1 7 (value2): 8 |
| COLLEV | Active Level of LED Column 0 (value1): Active low 1 (value2): Active high |
| NR_LEDCOL | Number of LED Columns 0 (value1): 1 LED column 1 (value2): 2 LED columns 2 (value3): 3 LED columns 3 (value4): 4 LED columns 4 (value5): 5 LED columns 5 (value6): 6 LED columns 6 (value7): 7 LED columns 7 (value8): 8 LED columns (max. LED columns = 7 if bit TS_EN = 1) |