BFI3=value1, BFI2=value1, BFL2=value1, BFL0=value1, BFI0=value1, BFA1=value1, BFA0=value1, BFL3=value1, BFA2=value1, BFA3=value1, BFI1=value1, BFL1=value1
Boundary Flag Register
| BFL0 | Boundary Flag 0 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFL1 | Boundary Flag 1 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFL2 | Boundary Flag 2 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFL3 | Boundary Flag 3 0 (value1): Passive state: result has not yet crossed the activation boundary (see bitfield BFAy), or selected gate signal is inactive, or this boundary flag is disabled 1 (value2): Active state: result has crossed the activation boundary |
| BFA0 | Boundary Flag 0 Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFA1 | Boundary Flag 1 Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFA2 | Boundary Flag 2 Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFA3 | Boundary Flag 3 Activation Select 0 (value1): Set boundary flag BFLy if result is above the defined band or compare value, clear if below 1 (value2): Set boundary flag BFLy if result is below the defined band or compare value, clear if above |
| BFI0 | Boundary Flag 0 Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |
| BFI1 | Boundary Flag 1 Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |
| BFI2 | Boundary Flag 2 Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |
| BFI3 | Boundary Flag 3 Inversion Control 0 (value1): Use BFLy directly 1 (value2): Invert value and use BFLy |