SIGN=value1, FIFOFUL=value1, RUN=value1, SIGNEN=value1, FIFOEMP=value1, NEGATE=value1, SREN=value1, MODE=value1
DAC0 Configuration Register 0
| FREQ | Integer Frequency Divider Value |
| MODE | Enables and Sets the Mode for DAC0 0 (value1): disable/switch-off DAC 1 (value2): Single Value Mode 2 (value3): Data Mode 3 (value4): Patgen Mode 4 (value5): Noise Mode 5 (value6): Ramp Mode 6 (value7): na 7 (value8): na |
| SIGN | Selects Between Signed and Unsigned DAC0 Mode 0 (value1): DAC expects unsigned input data 1 (value2): DAC expects signed input data |
| FIFOIND | Current write position inside the data FIFO |
| FIFOEMP | Indicate if the FIFO is empty 0 (value1): FIFO not empty 1 (value2): FIFO empty |
| FIFOFUL | Indicate if the FIFO is full 0 (value1): FIFO not full 1 (value2): FIFO full |
| NEGATE | Negates the DAC0 output 0 (value1): DAC output not negated 1 (value2): DAC output negated |
| SIGNEN | Enable Sign Output of DAC0 Pattern Generator 0 (value1): Disable 1 (value2): Enable |
| SREN | Enable DAC0 service request interrupt generation 0 (value1): disable 1 (value2): enable |
| RUN | RUN indicates the current DAC0 operation status 0 (value1): DAC0 channel disabled 1 (value2): DAC0 channel in operation |