PCRIEN=value1, RSCRIEN=value1, MCLK=value1, SCRIEN=value1, ACKIEN=value1, NACKIEN=value1, ACK00=value1, STIM=value1, SACKDIS=value1, SRRIEN=value1, ERRIEN=value1, ARLIEN=value1
Protocol Control Register [IIC Mode]
| SLAD | Slave Address |
| ACK00 | Acknowledge 00H 0 (value1): The slave device is not sensitive to this address. 1 (value2): The slave device is sensitive to this address. |
| STIM | Symbol Timing 0 (value1): A symbol contains 10 time quanta. The timing is adapted for standard mode (100 kBaud). 1 (value2): A symbol contains 25 time quanta. The timing is adapted for fast mode (400 kBaud). |
| SCRIEN | Start Condition Received Interrupt Enable 0 (value1): The start condition interrupt is disabled. 1 (value2): The start condition interrupt is enabled. |
| RSCRIEN | Repeated Start Condition Received Interrupt Enable 0 (value1): The repeated start condition interrupt is disabled. 1 (value2): The repeated start condition interrupt is enabled. |
| PCRIEN | Stop Condition Received Interrupt Enable 0 (value1): The stop condition interrupt is disabled. 1 (value2): The stop condition interrupt is enabled. |
| NACKIEN | Non-Acknowledge Interrupt Enable 0 (value1): The non-acknowledge interrupt is disabled. 1 (value2): The non-acknowledge interrupt is enabled. |
| ARLIEN | Arbitration Lost Interrupt Enable 0 (value1): The arbitration lost interrupt is disabled. 1 (value2): The arbitration lost interrupt is enabled. |
| SRRIEN | Slave Read Request Interrupt Enable 0 (value1): The slave read request interrupt is disabled. 1 (value2): The slave read request interrupt is enabled. |
| ERRIEN | Error Interrupt Enable 0 (value1): The error interrupt is disabled. 1 (value2): The error interrupt is enabled. |
| SACKDIS | Slave Acknowledge Disable 0 (value1): The generation of an active slave acknowledge is enabled (slave acknowledge with 0 level = more bytes can be received). 1 (value2): The generation of an active slave acknowledge is disabled (slave acknowledge with 1 level = reception stopped). |
| HDEL | Hardware Delay |
| ACKIEN | Acknowledge Interrupt Enable 0 (value1): The acknowledge interrupt is disabled. 1 (value2): The acknowledge interrupt is enabled. |
| MCLK | Master Clock Enable 0 (value1): The MCLK generation is disabled and MCLK is 0. 1 (value2): The MCLK generation is enabled. |