Status Fields
| DVS_STATE | State machine state |
| ADJ_UP_ENA | DVS Raising voltage |
| ADJ_DWN_ENA | DVS Lowering voltage |
| ADJ_ACTIVE | Adjustment to a Direct Voltage |
| CTR_TAP_OK | Tap Enabled and the Tap is withing Hi/Low limits |
| CTR_TAP_SEL | Status of selected center tap delay line detect output |
| SLOW_TRIP_DET | Provides the current combined status of all selected Low Range delay lines |
| FAST_TRIP_DET | Provides the current combined status of all selected High Range delay lines |
| PS_IN_RANGE | Indicates if the power supply is in range |
| PS_VCNTR | Voltage Count value sent to the power supply |
| MON_DLY_OK | Indicates the monitor delay count is at 0 |
| ADJ_DLY_OK | Indicates the adjustment delay count is at 0 |
| LO_LIMIT_DET | Power supply voltage counter is at low limit |
| HI_LIMIT_DET | Power supply voltage counter is at high limit |
| VALID_TAP | At least one delay line has been enabled |
| LIMIT_ERR | Interrupt flag that indicates a voltage count is at/beyond manufacturer limits |
| RANGE_ERR | Interrupt flag that indicates a tap has an invalid value |
| ADJ_ERR | Interrupt flag that indicates up and down adjustment requested simultaneously |
| REF_SEL_ERR | Indicates the ref select register bit is out of range |
| FB_TO_ERR | Interrupt flag that indicates a timeout while adjusting the voltage |
| FB_TO_ERR_S | Interrupt flag that mirror FB_TO_ERR and is write one clear |
| FC_LV_DET_INT | Interrupt flag that indicates the power supply voltage requested is below the low threshold |
| FC_LV_DET_S | Interrupt flag that mirrors FC_LV_DET_INT |