CHSEL11=B_0x0, CHSEL12=B_0x0, CHSEL6=B_0x0, CHSEL10=B_0x0, CHSEL3=B_0x0, CHSEL18=B_0x0, CHSEL14=B_0x0, CHSEL13=B_0x0, CHSEL4=B_0x0, CHSEL1=B_0x0, CHSEL17=B_0x0, CHSEL2=B_0x0, CHSEL16=B_0x0, CHSEL9=B_0x0, CHSEL8=B_0x0, CHSEL7=B_0x0, CHSEL5=B_0x0, CHSEL15=B_0x0, CHSEL0=B_0x0
ADC channel selection register [alternate]
| CHSEL0 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL1 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL2 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL3 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL4 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL5 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL6 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL7 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL8 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL9 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL10 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL11 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL12 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL13 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL14 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL15 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL16 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL17 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL18 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Refer to for ADC inputs connected to external channels and internal sources. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |