CHSEL0=B_0x0, CHSEL17=B_0x0, CHSEL18=B_0x0, CHSEL8=B_0x0, CHSEL6=B_0x0, CHSEL1=B_0x0, CHSEL13=B_0x0, CHSEL2=B_0x0, CHSEL11=B_0x0, CHSEL9=B_0x0, CHSEL10=B_0x0, CHSEL15=B_0x0, CHSEL3=B_0x0, CHSEL16=B_0x0, CHSEL12=B_0x0, CHSEL5=B_0x0, CHSEL14=B_0x0, CHSEL7=B_0x0, CHSEL4=B_0x0
ADC channel selection register
| CHSEL0 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL1 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL2 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL3 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL4 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL5 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL6 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL7 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL8 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL9 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL10 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL11 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL12 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL13 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL14 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL15 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL16 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL17 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |
| CHSEL18 | Channel-x selection These bits are written by software and define which channels are part of the sequence of channels to be converted. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). If CCRDY is not yet asserted after channel configuration (writing ADC_CHSELR register or changing CHSELRMOD or SCANDIR), the value written to this bit is ignored. 0 (B_0x0): Input Channel-x is not selected for conversion 1 (B_0x1): Input Channel-x is selected for conversion |