SMPSEL12=B_0x0, SMPSEL16=B_0x0, SMP1=B_0x0, SMPSEL6=B_0x0, SMPSEL17=B_0x0, SMPSEL11=B_0x0, SMPSEL2=B_0x0, SMPSEL10=B_0x0, SMPSEL3=B_0x0, SMPSEL5=B_0x0, SMPSEL7=B_0x0, SMPSEL14=B_0x0, SMPSEL0=B_0x0, SMPSEL4=B_0x0, SMPSEL18=B_0x0, SMPSEL8=B_0x0, SMPSEL1=B_0x0, SMPSEL9=B_0x0, SMPSEL15=B_0x0, SMP2=B_0x0, SMPSEL13=B_0x0
ADC sampling time register
| SMP1 | Sampling time selection 1 These bits are written by software to select the sampling time that applies to all channels. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): 1.5 ADC clock cycles 1 (B_0x1): 3.5 ADC clock cycles 2 (B_0x2): 7.5 ADC clock cycles 3 (B_0x3): 12.5 ADC clock cycles 4 (B_0x4): 19.5 ADC clock cycles 5 (B_0x5): 39.5 ADC clock cycles 6 (B_0x6): 79.5 ADC clock cycles 7 (B_0x7): 160.5 ADC clock cycles |
| SMP2 | Sampling time selection 2 These bits are written by software to select the sampling time that applies to all channels. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): 1.5 ADC clock cycles 1 (B_0x1): 3.5 ADC clock cycles 2 (B_0x2): 7.5 ADC clock cycles 3 (B_0x3): 12.5 ADC clock cycles 4 (B_0x4): 19.5 ADC clock cycles 5 (B_0x5): 39.5 ADC clock cycles 6 (B_0x6): 79.5 ADC clock cycles 7 (B_0x7): 160.5 ADC clock cycles |
| SMPSEL0 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL1 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL2 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL3 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL4 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL5 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL6 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL7 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL8 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL9 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL10 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL11 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL12 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL13 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL14 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL15 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL16 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL17 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |
| SMPSEL18 | Channel-x sampling time selection These bits are written by software to define which sampling time is used. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Sampling time of CHANNELx use the setting of SMP1[2:0] register. 1 (B_0x1): Sampling time of CHANNELx use the setting of SMP2[2:0] register. |