SE=B_0x0, EGE=B_0x0, SOIE=B_0x0, SPOL=B_0x0
DMAMUX request line multiplexer channel x configuration register
| DMAREQ_ID | DMA request identification Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources. |
| SOIE | Synchronization overrun interrupt enable 0 (B_0x0): interrupt disabled 1 (B_0x1): interrupt enabled |
| EGE | Event generation enable 0 (B_0x0): event generation disabled 1 (B_0x1): event generation enabled |
| SE | Synchronization enable 0 (B_0x0): synchronization disabled 1 (B_0x1): synchronization enabled |
| SPOL | Synchronization polarity Defines the edge polarity of the selected synchronization input: 0 (B_0x0): no event, i.e. no synchronization nor detection. 1 (B_0x1): rising edge 2 (B_0x2): falling edge 3 (B_0x3): rising and falling edge |
| NBREQ | Number of DMA requests minus 1 to forward Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated. This field shall only be written when both SE and EGE bits are low. |
| SYNC_ID | Synchronization identification Selects the synchronization input (see inputs to resources STM32G0). |