TDC=B_0x0
FDCAN data bit timing and prescaler register
| DSJW | Synchronization jump width Must always be smaller than DTSEG2, valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1: tSJW = (DSJW + 1) x tq. |
| DTSEG2 | Data time segment after sample point Valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS2 = (DTSEG2 + 1) x tq. |
| DTSEG1 | Data time segment before sample point Valid values are 0 to 31. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS1 = (DTSEG1 + 1) x tq. |
| DBRP | Data bit rate prescaler The value by which the oscillator frequency is divided to generate the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values for the Baud Rate Prescaler are 0 to 31. The hardware interpreters this value as the value programmed plus 1. |
| TDC | Transceiver delay compensation 0 (B_0x0): Transceiver delay compensation disabled 1 (B_0x1): Transceiver delay compensation enabled |