BORRSTF=B_0x0, RMVF=B_0x0, PINRSTF=B_0x0, OBLRSTF=B_0x0, WWDGRSTF=B_0x0, IWDGRSTF=B_0x0, LSIRDY=B_0x0, LSION=B_0x0, LPWRRSTF=B_0x0, SFTRSTF=B_0x0
Control/status register
| LSION | LSI oscillator enable Set and cleared by software. 0 (B_0x0): LSI oscillator OFF 1 (B_0x1): LSI oscillator ON |
| LSIRDY | LSI oscillator ready Set and cleared by hardware to indicate when the LSI oscillator is stable. After the LSION bit is cleared, LSIRDY goes low after 3 LSI oscillator clock cycles. This bit can be set even if LSION = 0 if the LSI is requested by the Clock Security System on LSE, by the Independent Watchdog or by the RTC. 0 (B_0x0): LSI oscillator not ready 1 (B_0x1): LSI oscillator ready |
| RMVF | Remove reset flag Set by software to clear the reset flags. 0 (B_0x0): No effect 1 (B_0x1): Clear the reset flags |
| OBLRSTF | Option byte loader reset flag Set by hardware when a reset from the Option Byte loading occurs. Cleared by writing to the RMVF bit. 0 (B_0x0): No reset from Option Byte loading occurred 1 (B_0x1): Reset from Option Byte loading occurred |
| PINRSTF | Pin reset flag Set by hardware when a reset from the NRST pin occurs. Cleared by writing to the RMVF bit. 0 (B_0x0): No reset from NRST pin occurred 1 (B_0x1): Reset from NRST pin occurred |
| BORRSTF | BOR flag Set by hardware when a BOR occurs. Cleared by writing to the RMVF bit. 0 (B_0x0): No BOR occurred 1 (B_0x1): BOR occurred |
| SFTRSTF | Software reset flag Set by hardware when a software reset occurs. Cleared by writing to the RMVF bit. 0 (B_0x0): No software reset occurred 1 (B_0x1): Software reset occurred |
| IWDGRSTF | Independent window watchdog reset flag Set by hardware when an independent watchdog reset domain occurs. Cleared by writing to the RMVF bit. 0 (B_0x0): No independent watchdog reset occurred 1 (B_0x1): Independent watchdog reset occurred |
| WWDGRSTF | Window watchdog reset flag Set by hardware when a window watchdog reset occurs. Cleared by writing to the RMVF bit. 0 (B_0x0): No window watchdog reset occurred 1 (B_0x1): Window watchdog reset occurred |
| LPWRRSTF | Low-power reset flag Set by hardware when a reset occurs due to illegal Stop, Standby or Shutdown mode entry. Cleared by writing to the RMVF bit. 0 (B_0x0): No illegal mode reset occurred 1 (B_0x1): Illegal mode reset occurred |