DAC mode control register
| MODE1 | DAC Channel 1 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN1=0 and bit CEN1 =0 in the DAC_CR register). If EN1=1 or CEN1 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 1 mode: DAC Channel 1 in normal Mode DAC Channel 1 in sample & hold mode |
| DMADOUBLE1 | DAC Channel1 DMA double data mode |
| SINFORMAT1 | Enable signed format for DAC channel1 |
| HFSEL | High frequency interface mode selection |
| MODE2 | DAC Channel 2 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN2=0 and bit CEN2 =0 in the DAC_CR register). If EN2=1 or CEN2 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 2 mode: DAC Channel 2 in normal Mode DAC Channel 2 in sample & hold mode |
| DMADOUBLE2 | DAC Channel2 DMA double data mode |
| SINFORMAT2 | Enable signed format for DAC channel2 |