MODE1=B_0x0
DAC mode control register
| MODE1 | DAC channel1 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN11=10 and bit CEN11=10 in the DAC_CR register). If EN11=11 or CEN11=11 the write operation is ignored. They can be set and cleared by software to select the DAC channel1 mode: DAC channel1 in Normal mode DAC channel1 in sample & hold mode Note: This register can be modified only when EN11=10. 0 (B_0x0): DAC channel1 is connected to external pin with Buffer enabled 1 (B_0x1): DAC channel1 is connected to external pin and to on chip peripherals with Buffer enabled 2 (B_0x2): DAC channel1 is connected to external pin with Buffer disabled 3 (B_0x3): DAC channel1 is connected to on chip peripherals with Buffer disabled 4 (B_0x4): DAC channel1 is connected to external pin with Buffer enabled 5 (B_0x5): DAC channel1 is connected to external pin and to on chip peripherals with Buffer enabled 6 (B_0x6): DAC channel1 is connected to external pin and to on chip peripherals with Buffer disabled 7 (B_0x7): DAC channel1 is connected to on chip peripherals with Buffer disabled |