G6_IO2=B_0x0, G6_IO1=B_0x0, G1_IO1=B_0x0, G6_IO4=B_0x0, G3_IO4=B_0x0, G2_IO1=B_0x0, G7_IO4=B_0x0, G4_IO4=B_0x0, G4_IO3=B_0x0, G7_IO3=B_0x0, G7_IO1=B_0x0, G6_IO3=B_0x0, G2_IO4=B_0x0, G2_IO3=B_0x0, G5_IO1=B_0x0, G4_IO1=B_0x0, G5_IO3=B_0x0, G5_IO2=B_0x0, G4_IO2=B_0x0, G2_IO2=B_0x0, G3_IO3=B_0x0, G3_IO2=B_0x0, G1_IO4=B_0x0, G5_IO4=B_0x0, G3_IO1=B_0x0, G1_IO3=B_0x0, G1_IO2=B_0x0, G7_IO2=B_0x0
TSC I/O sampling control register
| G1_IO1 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G1_IO2 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G1_IO3 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G1_IO4 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G2_IO1 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G2_IO2 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G2_IO3 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G2_IO4 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G3_IO1 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G3_IO2 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G3_IO3 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G3_IO4 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G4_IO1 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G4_IO2 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G4_IO3 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G4_IO4 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G5_IO1 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G5_IO2 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G5_IO3 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G5_IO4 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G6_IO1 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G6_IO2 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G6_IO3 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G6_IO4 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G7_IO1 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G7_IO2 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G7_IO3 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |
| G7_IO4 | Gx_IOy sampling mode These bits are set and cleared by software to configure the Gx_IOy as a sampling capacitor I/O. Only one I/O per analog I/O group must be defined as sampling capacitor. Note: These bits must not be modified when an acquisition is ongoing. Note: During the acquisition phase and even if the TSC peripheral alternate function is not enabled, as soon as the TSC_IOSCR bit is set, the corresponding GPIO analog switch is automatically controlled by the touch sensing controller. 0 (B_0x0): Gx_IOy unused 1 (B_0x1): Gx_IOy used as sampling capacitor |