This register is used to the integrator (INT) settings.
| INTDIV | Integrator output division Set and cleared by software. This bit is used to rescale the signal at the integrator output in order keep the data width lower than 24 bits. - 00: The integrator data outputs are divided by 128 (Default value) - 01: The integrator data outputs are divided by 32 - 10: The integrator data outputs are divided by 4 - 11: The integrator data outputs are not divided This field can be write-protected, please refer to Section 1.4.15: Register protection for details. |
| INTVAL | Integration value selection Set and cleared by software. This field is used to select the integration value. - 0: The integration value is 1, meaning bypass mode (default after reset) - 1: The integration value is 2 - 2: The integration value is 3 … - 127: The integration value is 128 This field can be write-protected, please refer to Section 1.4.15: Register protection for details. |