| TXDR | transmit data register The register serves as an interface with TxFIFO. A write to it accesses TxFIFO. Note: data is always right-aligned. Unused bits are ignored when writing to the register, and read as zero when the register is read. Note: DR can be accessed byte-wise (8-bit access): in this case only one data-byte is written by single access. halfword-wise (16 bit access) in this case 2 data-bytes or 1 halfword-data can be written by single access. word-wise (32 bit access). In this case 4 data-bytes or 2 halfword-data or word-data can be written by single access. Write access of this register less than the configured data size is forbidden. |