SWI12=B_0x0, SWI11=B_0x0, SWI15=B_0x0, SWI13=B_0x0, SWI9=B_0x0, SWI7=B_0x0, SWI3=B_0x0, SWI0=B_0x0, SWI5=B_0x0, SWI1=B_0x0, SWI24=B_0x0, SWI25=B_0x0, SWI8=B_0x0, SWI18=B_0x0, SWI10=B_0x0, SWI21=B_0x0, SWI4=B_0x0, SWI2=B_0x0, SWI6=B_0x0, SWI19=B_0x0, SWI20=B_0x0, SWI14=B_0x0, SWI22=B_0x0, SWI17=B_0x0, SWI16=B_0x0, SWI23=B_0x0
EXTI software interrupt event register
| SWI0 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI1 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI2 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI3 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI4 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI5 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI6 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI7 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI8 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI9 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI10 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI11 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI12 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI13 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI14 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI15 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI16 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI17 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI18 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI19 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI20 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI21 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI22 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI23 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI24 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |
| SWI25 | Software interrupt on event x When EXTI_SECCFGR.SECx is disabled, SWIx can be accessed with non-secure and secure access. When EXTI_SECCFGR.SECx is enabled, SWIx can only be accessed with secure access. Non-secure write to this SWI x is discarded, non-secure read returns 0. When EXTI_PRIVCFGR.PRIVx is disabled, SWIx can be accessed with unprivileged and privileged access. When EXTI_PRIVCFGR.PRIVx is enabled, SWIx can only be accessed with privileged access. Unprivileged write to this SWIx is discarded, unprivileged read returns 0. A software interrupt is generated independent from the setting in EXTI_RTSR and EXTI_FTSR. It always returns 0 when read. Note: SW25, SW24, and SW23 bits are only available on some devices in the STM32U5 Series. Refer to the EXTI line connections table for its availability. If not present, consider this bit as reserved and keep at reset value. 0 (B_0x0): Writing 0 has no effect. 1 (B_0x1): Writing 1 triggers a rising edge event on event x. This bit is auto cleared by hardware. |