HSLV15=B_0x0, HSLV8=B_0x0, HSLV1=B_0x0, HSLV11=B_0x0, HSLV7=B_0x0, HSLV2=B_0x0, HSLV0=B_0x0, HSLV9=B_0x0, HSLV13=B_0x0, HSLV14=B_0x0, HSLV4=B_0x0, HSLV10=B_0x0, HSLV12=B_0x0, HSLV3=B_0x0, HSLV6=B_0x0, HSLV5=B_0x0
GPIO high-speed low-voltage register
| HSLV0 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV1 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV2 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV3 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV4 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV5 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV6 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV7 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV8 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV9 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV10 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV11 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV12 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV13 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV14 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |
| HSLV15 | Port x high-speed low-voltage configuration These bits are written by software to optimize the I/O speed when the I/O supply is low. Each bit is active only if the corresponding IO_VDD_HSLV/IO_VDDIO2_HSLV user option bit is set. It must be used only if the I/O supply voltage is below 2.7 V. Setting these bits when the I/O supply (VDD or VDDIO2) is higher than 2.7 V may be destructive. Note: Not all I/Os support the HSLV mode. Refer to the I/O structure in the corresponding datasheet for the list of I/Os supporting this feature. Other I/Os HSLV configuration must be kept at reset value. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): I/O speed optimization disabled 1 (B_0x1): I/O speed optimization enabled |