I2C1RST=B_0x0, UART5RST=B_0x0, USART6RST=B_0x0, TIM3RST=B_0x0, TIM4RST=B_0x0, TIM6RST=B_0x0, TIM7RST=B_0x0, USART2RST=B_0x0, TIM2RST=B_0x0, I2C2RST=B_0x0, UART4RST=B_0x0, SPI2RST=B_0x0, TIM5RST=B_0x0, USART3RST=B_0x0, CRSRST=B_0x0
RCC APB1 peripheral reset register 1
| TIM2RST | TIM2 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the TIM2. |
| TIM3RST | TIM3 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the TIM3. |
| TIM4RST | TIM4 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the TIM4. |
| TIM5RST | TIM5 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the TIM5. |
| TIM6RST | TIM6 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the TIM6. |
| TIM7RST | TIM7 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the TIM7. |
| SPI2RST | SPI2 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the SPI2. |
| USART2RST | USART2 reset This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series.Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value. 0 (B_0x0): No effect 1 (B_0x1): Reset the USART2 |
| USART3RST | USART3 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the USART3. |
| UART4RST | UART4 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the UART4. |
| UART5RST | UART5 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the UART5. |
| I2C1RST | I2C1 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the I2C1. |
| I2C2RST | I2C2 reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the I2C2. |
| CRSRST | CRS reset This bit is set and cleared by software. 0 (B_0x0): No effect 1 (B_0x1): Reset the CRS. |
| USART6RST | USART6 reset This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value. 0 (B_0x0): No effect 1 (B_0x1): Reset the USART6. |