LPCE=B_0x0, LPHBPE=B_0x0, LPVBPE=B_0x0, PGM=B_0x0, LPVFPE=B_0x0, LPHFPE=B_0x0, LPVSAE=B_0x0, PGE=B_0x0, PGO=B_0x0, LPVAE=B_0x0, FBTAAE=B_0x0, VMT=B_0x0
DSI Host video mode configuration register
| VMT | Video mode type This field configures the video mode transmission type : 1x: Burst mode 0 (B_0x0): Non-burst with sync pulses. 1 (B_0x1): Non-burst with sync events. |
| LPVSAE | Low-power vertical sync active enable This bit enables to return to low-power inside the vertical sync time (VSA) period when timing allows. 0 (B_0x0): Return to low-power inside the VSA is disabled. 1 (B_0x1): Return to low-power inside the VSA is enabled |
| LPVBPE | Low-power vertical back-porch enable This bit enables to return to low-power inside the vertical back-porch (VBP) period when timing allows. 0 (B_0x0): Return to low-power inside the VBP is disabled. 1 (B_0x1): Return to low-power inside the VBP is enabled. |
| LPVFPE | Low-power vertical front-porch enable This bit enables to return to low-power inside the vertical front-porch (VFP) period when timing allows. 0 (B_0x0): Return to low-power inside the VFP is disabled. 1 (B_0x1): Return to low-power inside the VFP is enabled. |
| LPVAE | Low-power vertical active enable This bit enables to return to low-power inside the vertical active (VACT) period when timing allows. 0 (B_0x0): Return to low-power inside the VACT is disabled. 1 (B_0x1): Return to low-power inside the VACT is enabled. |
| LPHBPE | Low-power horizontal back-porch enable This bit enables the return to low-power inside the horizontal back-porch (HBP) period when timing allows. 0 (B_0x0): Return to low-power inside the HBP period is disabled. 1 (B_0x1): Return to low-power inside the HBP period is enabled. |
| LPHFPE | Low-power horizontal front-porch enable This bit enables the return to low-power inside the horizontal front-porch (HFP) period when timing allows. 0 (B_0x0): Return to low-power inside the HFP period is disabled. 1 (B_0x1): Return to low-power inside the HFP period is enabled. |
| FBTAAE | Frame bus-turn-around acknowledge enable This bit enables the request for an acknowledge response at the end of a frame. 0 (B_0x0): Acknowledge response at the end of a frame is disabled. 1 (B_0x1): Acknowledge response at the end of a frame is enabled. |
| LPCE | Low-power command enable This bit enables the command transmission only in low-power mode. 0 (B_0x0): Command transmission in low-power mode is disabled. 1 (B_0x1): Command transmission in low-power mode is enabled. |
| PGE | Pattern generator enable This bit enables the video mode pattern generator. 0 (B_0x0): Pattern generator is disabled. 1 (B_0x1): Pattern generator is enabled. |
| PGM | Pattern generator mode This bit configures the pattern generator mode. 0 (B_0x0): Color bars (horizontal or vertical). 1 (B_0x1): BER pattern (vertical only). |
| PGO | Pattern generator orientation This bit configures the color bar orientation. 0 (B_0x0): Vertical color bars. 1 (B_0x1): Horizontal color bars. |