Regviz

STMicroelectronics /STM32U5A9 /GPIOC /GPIO_IDR

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as GPIO_IDR

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/STMicroelectronics/STM32U599/GPIOB/GPIO_IDR#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (ID0)ID0 0 (ID1)ID1 0 (ID2)ID2 0 (ID3)ID3 0 (ID4)ID4 0 (ID5)ID5 0 (ID6)ID6 0 (ID7)ID7 0 (ID8)ID8 0 (ID9)ID9 0 (ID10)ID10 0 (ID11)ID11 0 (ID12)ID12 0 (ID13)ID13 0 (ID14)ID14 0 (ID15)ID15

Description

GPIO port input data register

Fields

ID0

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID1

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID2

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID3

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID4

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID5

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID6

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID7

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID8

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID9

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID10

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID11

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID12

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID13

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID14

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.
ID15

Port x input data I/O pin y These bits are read-only. They contain the input value of the corresponding I/O port. Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package.

Links

()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data