PUPD15=B_0x0, PUPD4=B_0x0, PUPD10=B_0x0, PUPD2=B_0x0, PUPD9=B_0x0, PUPD1=B_0x0, PUPD7=B_0x0, PUPD8=B_0x0, PUPD14=B_0x0, PUPD5=B_0x0, PUPD11=B_0x0, PUPD13=B_0x0, PUPD6=B_0x0, PUPD0=B_0x0, PUPD12=B_0x0, PUPD3=B_0x0
GPIO port pull-up/pull-down register
| PUPD0 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD1 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD2 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD3 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD4 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD5 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD6 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD7 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD8 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD9 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD10 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD11 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD12 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD13 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD14 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |
| PUPD15 | Port x configuration I/O pin y These bits are written by software to configure the I/O pull-up or pull-down Note: This field is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): No pull-up, pull-down 1 (B_0x1): Pull-up 2 (B_0x2): Pull-down 3 (B_0x3): Reserved |