EP=B_0x0, TFE=B_0x0, RF1N=B_0x0, TC=B_0x0, TSW=B_0x0, TEFL=B_0x0, TCF=B_0x0, HPM=B_0x0, BO=B_0x0, TEFF=B_0x0, PEA=B_0x0, EW=B_0x0, ARA=B_0x0, WDI=B_0x0, RF1L=B_0x0, RF0L=B_0x0, PED=B_0x0, TEFN=B_0x0, RF1F=B_0x0, TOO=B_0x0, ELO=B_0x0, MRAF=B_0x0, RF0F=B_0x0, RF0N=B_0x0
FDCAN interrupt register
| RF0N | Rx FIFO 0 new message 0 (B_0x0): No new message written to Rx FIFO 0 1 (B_0x1): New message written to Rx FIFO 0 |
| RF0F | Rx FIFO 0 full 0 (B_0x0): Rx FIFO 0 not full 1 (B_0x1): Rx FIFO 0 full |
| RF0L | Rx FIFO 0 message lost 0 (B_0x0): No Rx FIFO 0 message lost 1 (B_0x1): Rx FIFO 0 message lost |
| RF1N | Rx FIFO 1 new message 0 (B_0x0): No new message written to Rx FIFO 1 1 (B_0x1): New message written to Rx FIFO 1 |
| RF1F | Rx FIFO 1 full 0 (B_0x0): Rx FIFO 1 not full 1 (B_0x1): Rx FIFO 1 full |
| RF1L | Rx FIFO 1 message lost 0 (B_0x0): No Rx FIFO 1 message lost 1 (B_0x1): Rx FIFO 1 message lost |
| HPM | High-priority message 0 (B_0x0): No high-priority message received 1 (B_0x1): High-priority message received |
| TC | Transmission completed 0 (B_0x0): No transmission completed 1 (B_0x1): Transmission completed |
| TCF | Transmission cancellation finished 0 (B_0x0): No transmission cancellation finished 1 (B_0x1): Transmission cancellation finished |
| TFE | Tx FIFO empty 0 (B_0x0): Tx FIFO non-empty 1 (B_0x1): Tx FIFO empty |
| TEFN | Tx event FIFO New Entry 0 (B_0x0): Tx event FIFO unchanged 1 (B_0x1): Tx handler wrote Tx event FIFO element. |
| TEFF | Tx event FIFO full 0 (B_0x0): Tx event FIFO Not full 1 (B_0x1): Tx event FIFO full |
| TEFL | Tx event FIFO element lost 0 (B_0x0): No Tx event FIFO element lost 1 (B_0x1): Tx event FIFO element lost |
| TSW | Timestamp wraparound 0 (B_0x0): No timestamp counter wrap-around 1 (B_0x1): Timestamp counter wrapped around |
| MRAF | Message RAM access failure 0 (B_0x0): No Message RAM access failure occurred 1 (B_0x1): Message RAM access failure occurred |
| TOO | Timeout occurred 0 (B_0x0): No timeout 1 (B_0x1): Timeout reached |
| ELO | Error logging overflow 0 (B_0x0): CAN error logging counter did not overflow. 1 (B_0x1): Overflow of CAN error logging counter occurred. |
| EP | Error passive 0 (B_0x0): Error_Passive status unchanged 1 (B_0x1): Error_Passive status changed |
| EW | Warning status 0 (B_0x0): Error_Warning status unchanged 1 (B_0x1): Error_Warning status changed |
| BO | Bus_Off status 0 (B_0x0): Bus_Off status unchanged 1 (B_0x1): Bus_Off status changed |
| WDI | Watchdog interrupt 0 (B_0x0): No message RAM watchdog event occurred 1 (B_0x1): Message RAM watchdog event due to missing READY |
| PEA | Protocol error in arbitration phase (nominal bit time is used) 0 (B_0x0): No protocol error in arbitration phase 1 (B_0x1): Protocol error in arbitration phase detected (PSR. |
| PED | Protocol error in data phase (data bit time is used) 0 (B_0x0): No protocol error in data phase 1 (B_0x1): Protocol error in data phase detected (PSR. |
| ARA | Access to reserved address 0 (B_0x0): No access to reserved address occurred 1 (B_0x1): Access to reserved address occurred |