OPTCHANGEERRIE=B_0x0, SNB=B_0x00, OBKERRIE=B_0x0, BKSEL=B_0x0, INCERRIE=B_0x0, OBKWERRIE=B_0x0, STRBERRIE=B_0x0, PGSERRIE=B_0x0, MER=B_0x0, EOPIE=B_0x0, SER=B_0x0, BER=B_0x0, PG=B_0x0, WRPERRIE=B_0x0, LOCK=B_0x0
FLASH non-secure control register
| LOCK | configuration lock bit 0 (B_0x0): FLASH_NSCR register unlocked 1 (B_0x1): FLASH_NSCR register locked |
| PG | programming control bit 0 (B_0x0): programming disabled 1 (B_0x1): programming enabled |
| SER | sector erase request 0 (B_0x0): sector erase not requested 1 (B_0x1): sector erase requested |
| BER | erase request 0 (B_0x0): bank erase not requested 1 (B_0x1): bank erase requested |
| FW | write forcing control bit |
| STRT | erase start control bit |
| SNB | sector erase selection number 0 (B_0x00): Sector 0 selected 1 (B_0x01): Sector 1 selected 127 (B_0x7F): Sector 127 selected |
| MER | mass erase request 0 (B_0x0): mass erase not requested 1 (B_0x1): mass erase requested |
| EOPIE | end of operation interrupt control bit 0 (B_0x0): no interrupt generated at the end of operation. 1 (B_0x1): interrupt enabled when at the end of operation |
| WRPERRIE | write protection error interrupt enable bit 0 (B_0x0): no interrupt generated when a protection error occurs 1 (B_0x1): interrupt generated when a protection error occurs |
| PGSERRIE | programming sequence error interrupt enable bit 0 (B_0x0): no interrupt generated when a sequence error occurs 1 (B_0x1): interrupt generated when sequence error occurs |
| STRBERRIE | strobe error interrupt enable bit 0 (B_0x0): no interrupt generated when a strobe error occurs 1 (B_0x1): interrupt generated when strobe error occurs. |
| INCERRIE | inconsistency error interrupt enable bit 0 (B_0x0): no interrupt generated when a inconsistency error occurs 1 (B_0x1): interrupt generated when a inconsistency error occurs. |
| OBKERRIE | OBK general error interrupt enable bit 0 (B_0x0): no interrupt is generated on OBK general access error 1 (B_0x1): an interrupt is generated on OBK general access error |
| OBKWERRIE | OBK write error interrupt enable bit 0 (B_0x0): no interrupt is generated on OBK write error 1 (B_0x1): an interrupt is generated on OBK write error |
| OPTCHANGEERRIE | Option byte change error interrupt enable bit 0 (B_0x0): no interrupt is generated when an error occurs during an option byte change 1 (B_0x1): an interrupt is generated when and error occurs during an option byte change. |
| BKSEL | Bank selector bit 0 (B_0x0): Bank1 is selected for Bank erase / sector erase / interrupt enable 1 (B_0x1): Bank2 is selected for BER / SER |