SRAM1SO=B_0x0, SRAM2_16LSO=B_0x0, LPMS=B_0x0, SRAM2_16HSO=B_0x0, FLPS=B_0x0, BOOSTE=B_0x0, CSSF=B_0x0, SRAM2_48SO=B_0x0, SRAM3SO=B_0x0, AVD_READY=B_0x0
PWR power mode control register
| LPMS | low-power mode selection 0 (B_0x0): keeps Stop mode when entering DeepSleep. 1 (B_0x1): allows Standby mode when entering DeepSleep. |
| SVOS | system Stop mode voltage scaling selection 1 (B_0x1): SVOS5 scale 5 2 (B_0x2): SVOS4 scale 4 3 (B_0x3): SVOS3 scale 3 (default) |
| CSSF | clear Standby and Stop flags (always read as 0) 0 (B_0x0): no effect 1 (B_0x1): STOPF and SBF flags cleared |
| FLPS | flash memory low-power mode in Stop mode 0 (B_0x0): flash memory remains in normal mode when the system enters Stop mode (quick restart time). 1 (B_0x1): flash memory enters low-power mode when the system enters Stop mode(low-power consumption). |
| BOOSTE | analog switch Vless thansub>BOOSTless than/sub> control 0 (B_0x0): booster disabled (default) 1 (B_0x1): booster enabled if analog voltage ready (AVD_READY = 1) |
| AVD_READY | analog voltage ready 0 (B_0x0): peripheral analog voltage Vless thansub>DDAless than/sub> not ready (default) 1 (B_0x1): peripheral analog voltage Vless thansub>DDAless than/sub> ready. |
| SRAM3SO | AHB SRAM3 shut-off in Stop mode. 0 (B_0x0): AHB RAM3 content is kept in Stop mode. 1 (B_0x1): AHB RAM3 content is lost in Stop mode. |
| SRAM2_16LSO | AHB SRAM2 low 16-Kbyte shut-off in Stop mode. 0 (B_0x0): AHB RAM2 low 16-Kbyte content is kept in Stop mode. 1 (B_0x1): AHB RAM2 low 16-Kbyte content is lost in Stop mode. |
| SRAM2_16HSO | AHB SRAM2 high 16-Kbyte shut-off in Stop mode. 0 (B_0x0): AHB RAM2 high 16-Kbyte content is kept in Stop mode. 1 (B_0x1): AHB RAM2 ]high16-Kbyte content is lost in Stop mode. |
| SRAM2_48SO | AHB SRAM2 48-Kbyte shut-off in Stop mode. 0 (B_0x0): AHB RAM2 48-Kbyte content is kept in Stop mode. 1 (B_0x1): AHB RAM2 48-Kbyte content is lost in Stop mode. |
| SRAM1SO | AHB SRAM1 shut-off in Stop mode 0 (B_0x0): AHB RA. 1 (B_0x1): AHB RAM1 content is lost in Stop mode. |