stm32 /stm32h5 /STM32H563 /I3C /I3C_SR

data counter

• When the I3C is acting as controller: number of targets detected on the bus
• When the I3C is acting as target: number of transmitted bytes
• Whatever the I3C is acting as controller or target: number of data bytes read from or transmitted on the I3C bus during the MID[7:0] message

a private read message is completed/aborted prematurely by the target (when the I3C is acting as controller) When the I3C is acting as controller, this bit indicates if the private read data which is transmitted by the target early terminates (i.e. the target drives T bit low earlier vs what does expect the controller in terms of programmed number of read data bytes i.e. I3C_CR.DCNT[15:0]).

0 (B_0x0): no early completion/abort from the target

1 (B_0x1): early completion/abort from the target

message direction Whatever the I3C is acting as controller or target, this bit indicates the direction of the related message on the I3C bus Note: ENTDAA CCC is considered as a write command.

0 (B_0x0): write

1 (B_0x1): read

message identifier/counter of a given frame (when the I3C is acting as controller) When the I3C is acting as controller, this field identifies the control word message (i.e. I3C_CR) to which the I3C_SR status register refers. First message of a frame is identified with MID[7:0]=0. This field is incremented (by hardware) on the completion of a new message control word (i.e. I3C_CR) over I3C bus. This field is reset for every new frame start.