SYNCOUT=B_0x0
SAI global configuration register
| SYNCIN | Synchronization inputs These bits are set and cleared by software. Refer to for information on how to program this field. These bits must be set when both audio blocks (A and B) are disabled. They are meaningful if one of the two audio blocks is defined to operate in synchronous mode with an external SAI (SYNCEN[1:0] = 10 in SAI_ACR1 or in SAI_BCR1 registers). |
| SYNCOUT | Synchronization outputs These bits are set and cleared by software. 0 (B_0x0): No synchronization output signals. SYNCOUT[1:0] should be configured as ‘No synchronization output signals’ when audio block is configured as SPDIF 1 (B_0x1): Block A used for further synchronization for others SAI 2 (B_0x2): Block B used for further synchronization for others SAI 3 (B_0x3): Reserved. These bits must be set when both audio block (A and B) are disabled. |