PRELOAD=B_0x0
I3C target transmit configuration register
| TGTTDCNT | transmit data counter, in bytes (when I3C is configured as target) This field must be written by software in the same access when is asserted PRELOAD, in order to define the number of bytes to preload and to transmit. This field is updated by hardware and reports, when read, the remaining number of bytes to be loaded into the TX-FIFO. |
| PRELOAD | preload of the TX-FIFO (when I3C is configured as target) This bit must be written and asserted by software in the same access when is written and defined the number of bytes to preload into the TX-FIFO and to transmit. This bit is cleared by hardware when all the data bytes to transmit are loaded into the TX-FIFO. 0 (B_0x0): no TX-FIFO preload 1 (B_0x1): TX-FIFO preload |