SEDC=B_0x0, SRAMBUSY=B_0x0, DED=B_0x0
RAMCFG memory interrupt status register
| SEDC | ECC single error detected and corrected Note: This bit is reserved and must be kept at reset value in SRAM1 interrupt status register. 0 (B_0x0): No single error 1 (B_0x1): Single error detected and corrected |
| DED | ECC double error detected Note: This bit is reserved and must be kept at reset value in SRAM1 interrupt status register. 0 (B_0x0): No double error 1 (B_0x1): Double error detected |
| SRAMBUSY | SRAM busy with erase operation Note: Depending on the SRAM, the erase operation can be performed due to software request, system reset if the option bit is enabled, tamper detection or readout protection regression. Refer to Table 18: Internal SRAMs features. 0 (B_0x0): No erase operation on going 1 (B_0x1): Erase operation on going |