ADC Analog Watchdog 2 Configuration Register
AWD2CH | Analog watchdog 2 channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by the analog watchdog 2. AWD2CH[i] = 0: ADC analog input channel i is not monitored by AWD2 AWD2CH[i] = 1: ADC analog input channel i is monitored by AWD2 When AWD2CH[18:0] = 000…0, the analog Watchdog 2 is disabled Note: The channels selected by AWD2CH must be also selected into the SQRi or JSQRi registers. The software is allowed to write these bits only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing). Some channels are not connected physically and must not be selected for the analog watchdog. |