Regviz

stm32 /stm32h7 /STM32H7B3 /Flash /FLASH_PRAR_CUR1

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as FLASH_PRAR_CUR1

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/stm32/stm32h7/STM32H7A3/Flash/FLASH_PRAR_CUR1#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0PROT_AREA_START10PROT_AREA_END10 (DMEP1)DMEP1

Description

FLASH protection address for bank 1

Fields

PROT_AREA_START1

Bank 1 PCROP area start status bits These bits contain the first 256-byte block of the PCROP area in bank 1. If this address is equal to PROT_AREA_END1, the whole bank 1 is PCROP protected. If this address is higher than PROT_AREA_END1, no protection is set on bank 1.
PROT_AREA_END1

Bank 1 PCROP area end status bits These bits contain the last 256-byte block of the PCROP area in bank 1. If this address is equal to PROT_AREA_START1, the whole bank 1 is PCROP protected. If this address is lower than PROT_AREA_START1, no protection is set on bank 1.
DMEP1

Bank 1 PCROP protected erase enable option status bit If DMEP1 is set to 1, the PCROP protected area in bank 1 is erased when a protection level regression (change from level 1 to 0) or a bank erase with protection removal occurs.

Links

()

Register Reference

https://github.com/modm-io/cmsis-svd-stm32