SDDETF=B_0x0, FTHF=B_0x0, RXNEF=B_0x0, SDLVLF=B_0x0, SATF=B_0x0, CKABF=B_0x0, DOVRF=B_0x0, RFOVRF=B_0x0
ADF DFLT0 interrupt status register 0
| FTHF | RXFIFO threshold flag This bit is set by hardware, and cleared by the hardware when the RXFIFO level is lower than the threshold. 0 (B_0x0): RXFIFO threshold not reached 1 (B_0x1): RXFIFO threshold reached |
| DOVRF | Data overflow flag This bit is set by hardware and cleared by software by writing this bit to 1. 0 (B_0x0): Read 0 means that no overflow is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that an overflow is detected; Write 1 clears this flag. |
| RXNEF | RXFIFO not empty flag This bit is set and cleared by hardware according to the RXFIFO level. 0 (B_0x0): RXFIFO empty 1 (B_0x1): RXFIFO not empty |
| SATF | Saturation detection flag This bit is set by hardware and cleared by software by writing this bit to 1. 0 (B_0x0): Read 0 means that no saturation is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that a saturation is detected. Write 1 clears this flag. |
| CKABF | Clock absence detection flag This bit is set by hardware and cleared by software by writing this bit to 1. 0 (B_0x0): Read 0 means that no clock absence is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that a clock absence is detected. Write 1 clears this flag. |
| RFOVRF | Reshape filter overrun detection flag This bit is set by hardware and cleared by software by writing this bit to 1. 0 (B_0x0): Read 0 means that no reshape filter overrun is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that reshape filter overrun is detected. Write 1 clears this flag. |
| SDDETF | Sound activity detection flag This bit is set by hardware and cleared by software by writing this bit to 1. 0 (B_0x0): Read 0 means that no sound activity is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that sound activity is detected. Write 1 clears this flag. |
| SDLVLF | Sound level value ready flag This bit is set by hardware and cleared by software by writing this bit to 1. 0 (B_0x0): Read 0 means that new sound level value is not ready. Write 0 has no effect. 1 (B_0x1): Read 1 means that new sound level value is ready. Write 1 clears this flag. |