OSPEED4=B_0x0, OSPEED10=B_0x0, OSPEED13=B_0x0, OSPEED14=B_0x0, OSPEED0=B_0x0, OSPEED1=B_0x0, OSPEED5=B_0x0, OSPEED15=B_0x0, OSPEED6=B_0x0, OSPEED8=B_0x0, OSPEED9=B_0x0, OSPEED11=B_0x0, OSPEED3=B_0x0, OSPEED12=B_0x0, OSPEED7=B_0x0, OSPEED2=B_0x0
GPIO port output speed register
| OSPEED0 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED1 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED2 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED3 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED4 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED5 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED6 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED7 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED8 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED9 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED10 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED11 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED12 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED13 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED14 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED15 | Port x configuration I/O pin y These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. Note: The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |