CC1P=B_0x0, CC1E=B_0x0
TIM9 capture/compare enable register
| CC1E | Capture/Compare 1 output enable. 0 (B_0x0): Capture mode disabled / tim_oc1 is not active 1 (B_0x1): Capture mode enabled / tim_oc1 signal is output on the corresponding output pin |
| CC1P | Capture/Compare 1 output Polarity. When CC1 channel is configured as input, both CC1NP/CC1P bits select the active polarity of tim_ti1fp1 and tim_ti2fp1 for trigger or capture operations. CC1NP=0, CC1P=0: non-inverted/rising edge. The circuit is sensitive to tim_tixfp1 rising edge (capture or trigger operations in reset, external clock or trigger mode), tim_tixfp1 is not inverted (trigger operation in gated mode or encoder mode). CC1NP=0, CC1P=1: inverted/falling edge. The circuit is sensitive to tim_tixfp1 falling edge (capture or trigger operations in reset, external clock or trigger mode), tim_tixfp1 is inverted (trigger operation in gated mode or encoder mode). CC1NP=1, CC1P=1: non-inverted/both edges/ The circuit is sensitive to both tim_tixfp1 rising and falling edges (capture or trigger operations in reset, external clock or trigger mode), tim_tixfp1 is not inverted (trigger operation in gated mode). This configuration must not be used in encoder mode. CC1NP=1, CC1P=0: This configuration is reserved, it must not be used. 0 (B_0x0): tim_oc1 active high (output mode) / Edge sensitivity selection (input mode, see below) 1 (B_0x1): tim_oc1 active low (output mode) / Edge sensitivity selection (input mode, see below) |
| CC1NP | Capture/Compare 1 complementary output Polarity CC1 channel configured as output: CC1NP must be kept cleared CC1 channel configured as input: CC1NP is used in conjunction with CC1P to define tim_ti1fp1/tim_ti2fp1 polarity (refer to CC1P description). |
| CC2E | Capture/Compare 2 output enable Refer to CC1E description |
| CC2P | Capture/Compare 2 output Polarity Refer to CC1P description |
| CC2NP | Capture/Compare 2 output Polarity Refer to CC1NP description |