USART interrupt flag clear register
| PECF | Parity error clear flag Writing 1 to this bit clears the PE flag in the USART_ISR register. |
| FECF | Framing error clear flag Writing 1 to this bit clears the FE flag in the USART_ISR register. |
| NECF | Noise detected clear flag Writing 1 to this bit clears the NE flag in the USART_ISR register. |
| ORECF | Overrun error clear flag Writing 1 to this bit clears the ORE flag in the USART_ISR register. |
| IDLECF | Idle line detected clear flag Writing 1 to this bit clears the IDLE flag in the USART_ISR register. |
| TXFECF | TXFIFO empty clear flag Writing 1 to this bit clears the TXFE flag in the USART_ISR register. |
| TCCF | Transmission complete clear flag Writing 1 to this bit clears the TC flag in the USART_ISR register. |
| TCBGTCF | Transmission complete before Guard time clear flag Writing 1 to this bit clears the TCBGT flag in the USART_ISR register. |
| LBDCF | LIN break detection clear flag Writing 1 to this bit clears the LBDF flag in the USART_ISR register. Note: If LIN mode is not supported, this bit is reserved and must be kept at reset value. Refer to Section 33.4: USART implementation on page 1038. |
| CTSCF | CTS clear flag Writing 1 to this bit clears the CTSIF flag in the USART_ISR register. Note: If the hardware flow control feature is not supported, this bit is reserved and must be kept at reset value. Refer to Section 33.4: USART implementation on page 1038. |
| RTOCF | Receiver timeout clear flag Writing 1 to this bit clears the RTOF flag in the USART_ISR register. Note: If the USART does not support the Receiver timeout feature, this bit is reserved and must be kept at reset value. Refer to Section 33.4: USART implementation on page 1038. |
| EOBCF | End of block clear flag Writing 1 to this bit clears the EOBF flag in the USART_ISR register. Note: If the USART does not support Smartcard mode, this bit is reserved and must be kept at reset value. Refer to Section 33.4: USART implementation on page 1038. |
| UDRCF | SPI slave underrun clear flag Writing 1 to this bit clears the UDRF flag in the USART_ISR register. Note: If the USART does not support SPI slave mode, this bit is reserved and must be kept at reset value. Refer to Section 33.4: USART implementation on page 1038 |
| CMCF | Character match clear flag Writing 1 to this bit clears the CMF flag in the USART_ISR register. |
| WUCF | Wakeup from low-power mode clear flag Writing 1 to this bit clears the WUF flag in the USART_ISR register. Note: If the USART does not support the wakeup from Stop feature, this bit is reserved and must be kept at reset value. Refer to Section 33.4: USART implementation on page 1038. |