FORCEHOSTPD=B_0x0, CHGDET=B_0x0, VBVALOVAL=B_0x0, FSVPLUS=B_0x0, IDPULLUPDIS=B_0x0, PDEN=B_0x0, HVDMSRCEN=B_0x0, FSVMINUS=B_0x0, VBUSVLD=B_0x0, SDEN=B_0x0, DCDEN=B_0x0, HCDPDETEN=B_0x0, HCDPEN=B_0x0, SESSVLD=B_0x0, BCDEN=B_0x0
OTG general core configuration register
| CHGDET | Charger detection, result of the current mode (primary or secondary). 0 (B_0x0): Low value on pin 1 (B_0x1): High value on pin |
| FSVPLUS | Single-Ended DP indicator 0 (B_0x0): DM voltage at low level 1 (B_0x1): DM voltage at high level |
| FSVMINUS | Single-Ended DM indicator 0 (B_0x0): DM voltage at low level 1 (B_0x1): DM voltage at high level |
| SESSVLD | VBUS session indicator 0 (B_0x0): VBUS is below VBUS session threshold 1 (B_0x1): VBUS is above VBUS session threshold |
| VBUSVLD | VBUS valid indicator 0 (B_0x0): VBUS is below VBUS valid threshold 1 (B_0x1): VBUS is above VBUS valid threshold |
| HCDPEN | Host CDP behavior enable 0 (B_0x0): Disable CDP behavior 1 (B_0x1): Enable CDP behavior |
| HCDPDETEN | Host CDP port voltage detector enable on DP 0 (B_0x0): DP voltage detection disabled 1 (B_0x1): DP voltage detection enabled |
| HVDMSRCEN | Host CDP port Voltage source enable on DM 0 (B_0x0): DM voltage source disabled 1 (B_0x1): DM Voltage source enabled |
| DCDEN | Data Contact Detection enable 0 (B_0x0): Data Contact Detection disabled 1 (B_0x1): Data Contact Detection enabled |
| PDEN | Primary detection enable 0 (B_0x0): Primary detection disabled 1 (B_0x1): Primary detection enabled |
| SDEN | Secondary detection enable 0 (B_0x0): Secondary detection disabled 1 (B_0x1): Secondary detection enabled |
| VBVALOVAL | Software override value of the VBUS B-session detection 0 (B_0x0): B-session inactive 1 (B_0x1): B-session active |
| FORCEHOSTPD | Force host mode pull-downs 0 (B_0x0): Do not force host mode pull-downs 1 (B_0x1): Force host mode pull-downs |
| BCDEN | Force Battery charging (BC) mode 0 (B_0x0): Normal USB mode 1 (B_0x1): Battery Charging mode |
| IDPULLUPDIS | Disable ID pin pull-up 0 (B_0x0): Enables ID pin pull-up 1 (B_0x1): Disable ID pin pull-up |