PCSTS=B_0x0, PSUSP=B_0x0, PTCTL=B_0x0, PSPD=B_0x0, PENA=B_0x0, PRST=B_0x0, POCA=B_0x0, PRES=B_0x0, PPWR=B_0x0
OTG host port control and status register
| PCSTS | Port connect status 0 (B_0x0): No device is attached to the port 1 (B_0x1): A device is attached to the port |
| PCDET | Port connect detected |
| PENA | Port enable 0 (B_0x0): Port disabled 1 (B_0x1): Port enabled |
| PENCHNG | Port enable/disable change |
| POCA | Port overcurrent active 0 (B_0x0): No overcurrent condition 1 (B_0x1): Overcurrent condition |
| POCCHNG | Port overcurrent change |
| PRES | Port resume 0 (B_0x0): No resume driven 1 (B_0x1): Resume driven |
| PSUSP | Port suspend 0 (B_0x0): Port not in suspend mode 1 (B_0x1): Port in suspend mode |
| PRST | Port reset 0 (B_0x0): Port not in reset 1 (B_0x1): Port in reset |
| PLSTS | Port line status |
| PPWR | Port power 0 (B_0x0): Power off 1 (B_0x1): Power on |
| PTCTL | Port test control 0 (B_0x0): Test mode disabled 1 (B_0x1): Test_J mode 2 (B_0x2): Test_K mode 3 (B_0x3): Test_SE0_NAK mode 4 (B_0x4): Test_Packet mode 5 (B_0x5): Test_Force_Enable |
| PSPD | Port speed 0 (B_0x0): High speed 1 (B_0x1): Full speed 2 (B_0x2): Low speed |