PRIVC7=B_0x0, PRIVC6=B_0x0, PRIVC4=B_0x0, PRIVC5=B_0x0, PRIVC2=B_0x0, PRIVC1=B_0x0, BREN=B_0x0, SEC=B_0x0, PRIVC0=B_0x0, PRIVC3=B_0x0
RISAF region 12 configuration register
| BREN | base region enable 0 (B_0x0): Base region x is disabled. Access control of primary region 0 (secure, privileged) applies to any access between region x start and end addresses. Associated subregions are also disabled. 1 (B_0x1): Base region x is enabled. Access controls defined in region x apply to any access between region x start and end addresses. |
| SEC | secure region 0 (B_0x0): Only non-secure requests can access region x. SEC value in RISAF_REGx_zCFGR is internally treated as zeroed by RISAF (only non-secure requests to subregions). 1 (B_0x1): Only secure requests can access region x, and optional subregions can be defined as secure or non-secure. |
| PRIVC0 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |
| PRIVC1 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |
| PRIVC2 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |
| PRIVC3 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |
| PRIVC4 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |
| PRIVC5 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |
| PRIVC6 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |
| PRIVC7 | privileged access for compartment y 0 (B_0x0): Application running in compartment y can access to region x in privileged and unprivileged mode. 1 (B_0x1): Application running in compartment y can access to region x in privileged mode only. |