UIF=B_0x0, CC1OF=B_0x0, B2IF=B_0x0, COMIF=B_0x0, SBIF=B_0x0, TERRF=B_0x0, BIF=B_0x0, IDXF=B_0x0, TIF=B_0x0, DIRF=B_0x0, CC1IF=B_0x0, IERRF=B_0x0
TIM8 status register
| UIF | Update interrupt flag 0 (B_0x0): No update occurred. 1 (B_0x1): Update interrupt pending. This bit is set by hardware when the registers are updated: |
| CC1IF | Capture/compare 1 interrupt flag 0 (B_0x0): No compare match / No input capture occurred 1 (B_0x1): A compare match or an input capture occurred |
| CC2IF | Capture/compare 2 interrupt flag |
| CC3IF | Capture/compare 3 interrupt flag |
| CC4IF | Capture/compare 4 interrupt flag |
| COMIF | COM interrupt flag 0 (B_0x0): No COM event occurred. 1 (B_0x1): COM interrupt pending. |
| TIF | Trigger interrupt flag 0 (B_0x0): No trigger event occurred. 1 (B_0x1): Trigger interrupt pending. |
| BIF | Break interrupt flag 0 (B_0x0): No break event occurred. 1 (B_0x1): An active level has been detected on the break input. An interrupt is generated if BIE=1 in the TIMx_DIER register. |
| B2IF | Break 2 interrupt flag 0 (B_0x0): No break event occurred. 1 (B_0x1): An active level has been detected on the break 2 input. An interrupt is generated if BIE=1 in the TIMx_DIER register. |
| CC1OF | Capture/compare 1 overcapture flag 0 (B_0x0): No overcapture has been detected. 1 (B_0x1): The counter value has been captured in TIMx_CCR1 register while CC1IF flag was already set |
| CC2OF | Capture/compare 2 overcapture flag |
| CC3OF | Capture/compare 3 overcapture flag |
| CC4OF | Capture/compare 4 overcapture flag |
| SBIF | System break interrupt flag 0 (B_0x0): No break event occurred. 1 (B_0x1): An active level has been detected on the system break input. An interrupt is generated if BIE=1 in the TIMx_DIER register. |
| CC5IF | Compare 5 interrupt flag |
| CC6IF | Compare 6 interrupt flag |
| IDXF | Index interrupt flag 0 (B_0x0): No index event occurred. 1 (B_0x1): An index event has occurred |
| DIRF | Direction change interrupt flag 0 (B_0x0): No direction change 1 (B_0x1): Direction change |
| IERRF | Index error interrupt flag 0 (B_0x0): No index error has been detected. 1 (B_0x1): An index error has been detected |
| TERRF | Transition error interrupt flag 0 (B_0x0): No encoder transition error has been detected. 1 (B_0x1): An encoder transition error has been detected |