RegViz: Visualize MDF_DFLT0ISR Bitfield

stm32 /stm32n6 /STM32N655 /MDF1 /MDF_DFLT0ISR

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as MDF_DFLT0ISR

DOVRF=B_0x0, THHF=B_0x0, SSOVRF=B_0x0, FTHF=B_0x0, SATF=B_0x0, RFOVRF=B_0x0, RXNEF=B_0x0, SSDRF=B_0x0, CKABF=B_0x0, SCDF=B_0x0, THLF=B_0x0, OLDF=B_0x0

Description

MDF DFLT0 interrupt status register 0

Fields

FTHF	RXFIFO threshold flag 0 (B_0x0): RXFIFO threshold not reached 1 (B_0x1): RXFIFO threshold reached
DOVRF	Data overflow flag 0 (B_0x0): Read 0 means that no overflow is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that an overflow is detected; Write 1 clears this flag.
SSDRF	Snapshot data ready flag 0 (B_0x0): Read 0 means that no data is available. Write 0 has no effect. 1 (B_0x1): Read 1 means that a new data is available. Write 1 clears this flag.
RXNEF	RXFIFO not-empty flag 0 (B_0x0): RXFIFO empty 1 (B_0x1): RXFIFO not empty
OLDF	OLD0 flag 0 (B_0x0): Read 0 means that no OLD0 event is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that an OLD0 event is detected Write 1 clears THHF, THLF and OLDF.
THLF	Low-threshold status flag 0 (B_0x0): The signal was higher than OLDTHL when the last OLD0 event occurred. 1 (B_0x1): The signal was lower than OLDTHL when the last OLD0 event occurred.
THHF	High-threshold status flag 0 (B_0x0): The signal was lower than OLDTHH when the last OLD0 event occurred. 1 (B_0x1): The signal was higher than OLDTHH when the last OLD0 event occurred.
SSOVRF	Snapshot overrun flag 0 (B_0x0): Read 0 means that no snapshot overrun event is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that a snapshot overrun event is detected. Write 1 clears this flag.
SCDF	Short-circuit detector flag 0 (B_0x0): Read 0 means that no SCD0 event is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that a SCD0 event is detected. Write 1 clears this flag.
SATF	Saturation detection flag 0 (B_0x0): Read 0 means that no saturation is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that a saturation is detected. Write 1 clears this flag.
CKABF	Clock absence detection flag 0 (B_0x0): Read 0 means that no clock absence is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that a clock absence is detected. Write 1 clears this flag.
RFOVRF	Reshape filter overrun detection flag 0 (B_0x0): Read 0 means that no reshape filter overrun is detected. Write 0 has no effect. 1 (B_0x1): Read 1 means that reshape filter overrun is detected. Write 1 clears this flag.

Links

()